Pegasus Auto Racing Supplies
Providing great service since 1980
| Today's Featured Items | |||
|---|---|---|---|
AiM MXG 1.3 Dash Logger + GPS Module Roof Version 2.0M Cable See the data you want, how you want it! The brilliant 7" TFT 800x480 pixel display on the AiM MXG 1.3 data logging dash frees you from just one factory-designed screen. |
Aluminum Hose Ends for PTFE-Lined 811 / 825 / 910 Hose These reusable aluminum hose ends work with Goodridge PTFE-lined braided hose. They require no special tools to assemble, so you can build hoses at the track. |
Redhead 1.25" Push Pull Refueling Valve, Male Probe Redhead valves were designed to refuel Indy cars without spillage. This male probe valve attaches to your fueling rig and mates to a 1.25 inch female receptacle. | |
SCAT Crankshaft for Formula Ford 1600, Drop-In Version This SCAT crankshaft is designed specifically for SCCA Formula Ford 1600. The counterweights are shaved for clearance with no modification to your block. |
(B) Varley Red Top 40 Battery, 39AH Varley Red Top Batteries are specifically engineered for racing. The Red Top 40 is perfect for large GT and Touring cars. |
Facet Cube 12v Fuel Pump, 1/8 NPT, 7-10 psi The Facet 40107 Cube 12 Volt Fuel Pump delivers a maximum flow of 34 GPH or 7-10 psi max pressure. 1/8 NPT female ports. | |
Arai GP-7 Helmet, Snell SA2020, FIA8859 - XS to Large Only The Arai GP-7 has revised inlet and exhaust vents for better cooling and aero stability. Snell SA2020 and FIA 8859-2015 approved for use with HANS Devices. |
Camloc 27S3 Light Duty Stud, Flush Head, Cross Recess These light-duty Camloc flush head cross recessed studs are rated for 200 pounds working strength. The Phillips (cross) head allows quick use with standard #2 Phillips screwdrivers. |
Aurora Oversize Shank Alloy Steel Male Rod End, PTFE Lined Aurora XAM-T / XAB-T rod ends have oversized male alloy steel shanks for strength and durability. The race is lined with self-lubricating PTFE. | |
Hawk HP660 Hi-Temp Racing Brake Fluid, 500ml Bottle Hawk Brake HP660 Hi-Temp DOT 4 racing brake fluid has an extra-high dry boiling point of 608F for the most severe racing use. A great match for Hawk racing brake pads! |
Setrab Series 6 Oil Cooler, 50 Row, M22 Ports This Setrab Series 6 Oil Cooler has 50 rows for maximum cooling capacity with minimal pressure drop. M22 ports are easy to adapt to any oil system. |
MOMO Model 69 Racing Steering Wheel, Suede, 350mm The MOMO Model 69 racing steering wheel features a thick, 350mm (13.78) diameter round-section grip with finger notches on the backside and a moderate dish (measures 39mm / 1.5" front-to-back). | |
Blue Silicone Hose, 2" I.D. 90 degree Elbow, 6" Legs Our 2 inch ID 90 Degree Elbows are designed for custom coolant plumbing. Blue silicone hose has 3 ply reinforcement with 6 inch long legs. |
225 F Temperature Switch, 1/4 NPT This single-terminal self grounding switch closes at 225F and higher. Works with any two-wire (non-grounding) warning light. Uses 1/4 NPT male threads |
SuperCar Interior Convex Mirror, Carbon Fiber Our wide-angle 18x2.5 inch genuine carbon fiber mirror is designed for racing sedans. The back is contoured to fit around a rollcage tube. | |
Master Battery Cutoff Switch with Alternator Protection Our SCCA-legal master battery cut off switches are the highest quality available for racing. Don't risk DNFs on a clone! Kills ignition and protects alternator. |
Brake Rotor, FF/CFF Inboard Rear (AP CP2366-5) This brake rotor is brand new and exclusively for racing use. Directly replaces the AP CP2366-5, fitting the Formula Ford and Club Formula Ford Inboard Rear. |
2 to 7 psi Adjustable Fuel Pressure Warning Switch, 1/8 NPT This switch is designed to trigger your low fuel pressure warning light (not included). Turns on when pressure falls below the set point. Adjustable from 2 to 7 psi. | |
ITG JC20 Megaflow Air Filter Element Only, each ITG Megaflow Racing Air Filters use a 3-stage foam for excellent airflow with great filtration. JC20 elements measure 5.9" wide x 7.6" long for use on a single carburetor. |
40/45 DCOE Rebuild Kit, Normally Aspirated, 200 Needle The "Old Style" rebuild kit is suitable for Weber 40/45 DCOE carburetors in normally-aspirated (non-turbo) applications. This kit includes a 200 needle valve but no float. |
OMP One Evo Underwear Bottom, FIA 8856-2018 These pants will provide the final layer of fire resisance, worn under a driving suit. | |
Top Quality, Huge Selection and Very Competitive Prices on Silicone Hose
Nearly 1,000 different part numbers are now in stock from 1/2 inch to 6 inch inside diameter. Available in black, blue or red. Save on our durable, heat-resistant, high-quality Silicone Hose. Great for coolant or turbo intake plumbing. We make it easy to find the hoses that you need:  Gates PowerGrip Hose Clamps |
Congrats to Jason Vinkemulder of Mason Michigan
Jason is the most recent winner in our $5,000 sweepstakes. Every time you place an order you'll be entered. No purchase necessary. Other past winners include: Sean McGray of Las Vegas NV |
Special Message for International Customers
Export orders make up a significant portion of our sales. Because of our high volume of international shipments, we have been able to negotiate reduced rates for expedited shipping to foreign destinations. Information on International Shipping
Pegasus Supports Racing2004 thru 2024 SCCA Runoffs® Contingency Sponsor 2012 thru 2024 Vintage Sports 2000 Series Sponsor 2014 thru 2024 Formula 600 Challenge Series Sponsor VSCDA Driver's School Sponsor NSSCC Driver's School Sponsor and many other events | |
| New: Take a Virtual Tour of our Showroom and Warehouse (go through the double doors to the left of the Hawk banner to get to the warehouse) |
|---|
Pegasus is located at 2475 S. 179th Street, New Berlin WI 53146 USA
In addition to our large warehouse, we also have a small showroom and customer service counter. If you're in the area, feel free to stop by!
Click the above photo for a behind the scenes look at our warehouse expansion project.