Arsite Technique tank 300 litre - AR-3001
Arsite ABBox 50640 61 Stallarholmenwww.arsite.seTechnique tank is a tank that is designed for combining as many functions as possible. It is built in a way making maximum energy savings as well as self-circulation decreasing. Using a high and narrow tank in order to create a natural stratification of the water solved this problem. We have used 60 mm polyurethane for insulation and with a lambda value of .=0.0309 losses are minimal.
AR-3001 contains 300 litres and has 2 heat exchangers and a 16-meter long bottom-heating coil (Ø 19)). In addition there is a 26-meter long heating coil with the same diameter, ranging from bottom to top.
AR-3001 has a non-corrosive (stainless steel) inner tank with a casing of plastic steel that is scratchproof and impact resistant. The design is clean and elegant with a discreet ivory-coloured coating that fits into any environment.
Arsite vacuum panel new design - smarter construction!
Heat Pipe 15 vacuum pipe AR-815 Heat pipe is a closed system that has become very popular during the last 10 years. It is based on a vacuum pipe with a copper pipe that is superconductive. It transports the heat from the solar panels to the collector pipe where it heats the circulating water. The connection between the superconductive pipe and the collector is brand new and patented in China. Heat transfer is more effective and brings more heated water. Smart and effective!
If you should have to change the vacuum pipe you can do so without closing down the system or letting any water out. The reinforced aluminium frame covers the whole panel and makes it easy to mount. Two pipes to your temperature sensors gives you full control over the efficiency on the panel.
The panel is delivered with mounted pipes including a protection cover which makes it easy to just open the box and install your panel without having to think of if the sun is shining or not before you fill your system with fluid.It is as easy as it can get!
 |
Size: Hight 1735mm, Breadth 1160mm, Thickness
90mm Vacuumpipe: 15 pieces diameter 47 mm lenght 1500mm Pipe connection: 22 mm pipe incl bypass host for return water Absorption area: Total absorption area is aprox. 2,5 kvm Water pressure: Max water pressure in system is 1,2 Mpa, working pressure 0,6 Mpa. Efficiency: The panel start to give energy at a temperature of 22 degrees in the vacuum pipe, energy at a water temperature of 50 degrees is approximate 600KWh/m2. |
Bavini 6200 Air/Water Heat pump
Bavini air/water heating pumps is a Swedish development of a Japanese-China-based collaboration where the better parts of two worlds are combined. The heat pump comes in three models, all based on Toshiba compressors. The smaller model is intended for smaller installations or for heating drinking water only. Bavini 6200 has a 7,0 kW power output, the Bavini 3300 is equipped with a portable pump that is suited for smaller pools and the Bavini 8000, finally, is intended for bigger pools.
All Bavini air/water heat pumps are very easy to install since they are built on the plug and play-technique. This means that everything is pre assembled in the factory, so the only thing you have to do is to put the plug into a 230 V socket.It is as easy as it can get.
The control unit is easy to use and has a big, clear display on which you can regulate the temperature of the water into the mode you want your heat pump to function. Furthermore there are controls for starting and stopping the circulation pump and turning on an extra heat source. The Bavini heat pump is designed for our Scandinavian climate. Freezing of the defrosting water is prevented by a built-in heating cable as is the whole heater exchange package including connection pipes. So this is really a pump for tough conditions.
