How the system works: It utilizes flashing lights, a screaming siren and monitoring.  You can program it to dial up to 4 phone numbers of your choosing!  When an alarm is triggered, the 7000 will sound a built-in 85dB siren, optional extra-loud sirens inside or outside (see below), flash controlled lights and call up to four telephone numbers. It then plays a message that you record and allows the person receiving the call to listen in. The system will continue dialing until the person receiving the call enters 0. In the recording you should say something like this is, "Tom Andrew’s security system at (206) 555-9200, there has been a security alert, please press 0 to acknowledge and listen in!" Answering machines will not fool it.

You can use any combination of door/window, motion detector, glass break, sirens, smoke detector sensors you want!! The status of each sensor is displayed by the LEDs on the console. If the LED is off, the sensor is OK. If it is on, the sensor has been tripped. If it is flashing, then the sensor battery is low or the sensor has been tampered with. The LEDs work even when the system is disarmed so you can see what is going on in the various zones of your house! Was there something more that you wanted? If so, how about the ability to turn your lights off and on via your console or key chain remote! The system holds up to 8 key chain remotes - hopefully enough for the entire family!

Console features:  Tabletop mounting.  Holds up to 8 user codes or key chain remotes. One button arming capable. Transmission/Receiver distance - 100 ft. (expandable - see below). 16 zone capability. 

Includes:

• One Main Console, with built in siren. Powers up by simply plugging it into any electrical outlet. Console retains system memory (programming, user codes, etc.) upon total power failure. Simply plug the console into any phone jack
• Two wireless door/window contact switches
• One interior Passive Infrared Motion Detector
• One Key chain Remote
• One Lamp Module (displayed bottom right of the main security console above)
• One Remote Security Control (displayed left of the main security console above)

DVS 7000 Wireless Security System	$199.95	Item #3310

• Away mode: Arms the perimeter of your facility by arming your doors, windows and your interior Passive Infrared Motion Sensor.

• Home mode: Bypasses the interior Passive Infrared and arms the perimeter of your home only. Use this when you're home at night!

• Home Automation: Turn your lights off and on via your key chain remote control. Great for when entering your home at night!

• Chime mode: When a door is opened (can be windows too), the panel will chime. Great for those times when you just want to know if someone is coming or going. Eliminates surprises! 

• Flashing lights, screaming siren: During an alarm, no ones going to miss the light show and audible screaming siren this system is capable of displaying!

• Console Panic button:  Program the alarm to sound and also dial a party you wish contacted. The system will do this for the Panic button and in regular alarm mode!

Additional Accessories listed below

We realize you may need other openings covered, thus we've reduced the transmitter contact switches. These wireless transmitters install just as simply as the rest of the system. For installation, simply remove the back plate, and then screw the back plate onto the surface next to your door or window. Once done, slide the transmitter back onto the back plate. Its that simple!

Wireless Door/Window Transmitter Switch	$34.95	Item #3310-dw

One Motion Detector not enough? In most applications (for home's), usually the user can place one motion detector towards the front of the home that will cover a Living room, kitchen and hall way all in one shot. Coverage in an area like that is important because for intruders, the living room is a hot spot. TV's, VCR's, Stereo's etc. will be located there and burglar's know this.  However, if you feel you would like another Motion detector for additional coverage, we've dropped our price for this item as well!

Wireless Motion Detector	$69.95	Item #3310-ir

Most people usually carry their keys with them - thus key chain remote transmitters are an excellent way to activate or deactivate your alarm system! Turn your lights on as you pull in the driveway and deactivate your alarm before entering your home! If need be, you can also summon for help! You and your security system are just a button press away!

Features: Arm (instant mode), disarm, on and off button for one group of lights. Offers a panic feature to trip the system immediately. 40 ft. range. Use up to 7 additional key chain remotes.

Remote Control Key FOB	$38.95	Item #3310-kc

Features: 2 arming options allow you to arm your security system in "home" or "away" mode. Also features panic button for instant alarm and on/off, dim/bright control for lights. 100 ft. range..

Wireless Security Control Panel	$49.95	Item #3310-kp

The RF Repeater extends the range and performance of the Wireless DVS7000 Security System and Home Automation Remote Controls up to an additional 100 ft. It's placed between the furthest Door/Window Sensors, Motion Detectors, or Remote Controls and the main receiver unit. Receives the radio frequency (RF) transmissions from the sensors and controllers, and repeats (re-transmits) them to the receiver. Up to four repeaters can be used allowing RF coverage of very large homes and buildings (up to 80,000 square feet).

Wireless RF Repeater	$99.95	Item #3310-rm